推薦新聞
路用MS密封膠的性能評價標準與測試方法
裂縫修補的環氧丁基防水嵌縫膠的老化過程
路用MS密封膠的材料自身性能研究
丁基防水嵌縫膠的性能研究
穩定劑對固化后硅烷改性聚氨酯密封膠耐老化性能影響
- 發布時間 : 2025-12-20 12:22:06
- Views:
(Summary description)Customized SILICONE STRUCTURAL SEALANT from China manufacturer refers to the adhesive with high strength, can bear large load, aging resistance, fatigue resistance and corrosion resistance, and has stable performance within the expected life. It is suitable for bearing the bonding of strong structural parts. Non structural adhesive has low strength and poor durability. It can only be used for bonding, sealing and fixing of ordinary and temporary properties, and cannot be used for structural adhesive bonding. NEUTRAL SILICONE WETHERPROOF SEALANT from China manufacturer is a structural adhesive with waterproof function. Silicone glue refers to the adhesive based on silicone rubber. According to different functions, it can be divided into structural adhesive, potting adhesive, sealant, thermal conductive adhesive, flame retardant adhesive and so on.
穩定劑對固化后硅烷改性聚氨酯密封膠耐老化性能影響
(Summary description)Customized SILICONE STRUCTURAL SEALANT from China manufacturer refers to the adhesive with high strength, can bear large load, aging resistance, fatigue resistance and corrosion resistance, and has stable performance within the expected life. It is suitable for bearing the bonding of strong structural parts. Non structural adhesive has low strength and poor durability. It can only be used for bonding, sealing and fixing of ordinary and temporary properties, and cannot be used for structural adhesive bonding. NEUTRAL SILICONE WETHERPROOF SEALANT from China manufacturer is a structural adhesive with waterproof function. Silicone glue refers to the adhesive based on silicone rubber. According to different functions, it can be divided into structural adhesive, potting adhesive, sealant, thermal conductive adhesive, flame retardant adhesive and so on.
- 發布時間 : 2025-12-20 12:22:06
- Views:
增塑劑對固化后硅烷改性聚氨酯密封膠耐老化性能的影響,分別采用增塑劑T-50,DINP和DI,不添加抗老化助劑制備硅烷改性聚氨酯密封膠,對固化后產品耐老化情況進行研究,拉伸性能變化。
由可知,使用增塑劑DI的產品經歷老化后拉伸強度和斷裂伸長率變化率均滿足行標要求,含其他兩種增塑劑的試片均有5項不符合要求,說明使用增塑劑DI的產品耐老化性能較好。
含3種增塑劑的試片表面戶外自然老化情況。由可知,戶外自然老化試驗后試片表面老化情況都比較嚴重,且采用DI增塑劑制備的硅烷改性聚氨酯密封膠試片表面老化最嚴重。綜合表1和圖4結果可知,3種增塑劑所制硅烷改性聚氨酯密封膠經歷不同老化試驗后的本體拉伸性能與表面老化性能均不相同。
填料對固化后硅烷改性聚氨酯密封膠耐老化性能的影響,為驗證填料對硅烷改性聚氨酯密封膠性能的影響,本研究選取輕質碳酸鈣(簡稱輕鈣)、滑石粉、活性納米碳酸鈣(簡稱活性鈣)分別與炭黑復合進行了試驗,考察試片老化后拉伸性能變化情況。
由可知,填料對硅烷改性聚氨酯密封膠老化后拉伸性能會產生影響,加人3種填料的產品綜合耐老化性能均不能滿足行標要求,采用活性鈣的硅烷改性聚氨酯密封膠老化試驗后本體的耐老化性能略好。戶外自然老化樣品表面。
看出,使用活性鈣的硅烷改性聚氨酯密封膠試片表面掉黑粉現象明顯好于滑石粉和輕鈣作為填料的試片。表面有機處理的活性鈣與預聚物有機基體和炭黑填料相容性好,說明提高材料之間相容性可以改善其表面老化情況。
聚氨醋常用抗老化穩定劑有紫外線吸收劑、抗氧劑等。抗氧劑充當了自由基清除劑,阻斷了自由基降解的途徑,而紫外線吸收劑則將紫外光能量轉變成損害較弱的熱能消散掉。本項目選擇了UV-1, UV-767, ChisorbSUV , Chinox 235等穩定劑單獨或復配,固定總質量分?jǐn)?shù)0.8%制備硅烷改性聚氨酯密封膠試片,戶外自然老化巧個月考察其表面老化情況,發現以抗氧劑與紫外線吸收劑并用,對機械性能的穩定效果明顯優于單獨使用紫外線吸收劑。http://www.kzgjfl.cn/
Scan the QR code to read on your phone
+86-
13573398725
sdyuantai@163.com
