硅烷改性聚氨酯密封膠的不同厚度試件的剪切性能測試

發布時間 : 2026-1-5 17:27:49
Views:

(Summary description)Customized SILICONE STRUCTURAL SEALANT from China manufacturer refers to the adhesive with high strength, can bear large load, aging resistance, fatigue resistance and corrosion resistance, and has stable performance within the expected life. It is suitable for bearing the bonding of strong structural parts. Non structural adhesive has low strength and poor durability. It can only be used for bonding, sealing and fixing of ordinary and temporary properties, and cannot be used for structural adhesive bonding. NEUTRAL SILICONE WETHERPROOF SEALANT from China manufacturer is a structural adhesive with waterproof function. Silicone glue refers to the adhesive based on silicone rubber. According to different functions, it can be divided into structural adhesive, potting adhesive, sealant, thermal conductive adhesive, flame retardant adhesive and so on.

硅烷改性聚氨酯密封膠的不同厚度試件的剪切性能測試

發布時間 : 2026-1-5 17:27:49
Views:

Information

3種硅烷改性聚氨酯密封膠的不同厚度試件進行拉伸粘結性測試后的粘結破壞面積為0，與鋁材、不銹鋼、玻璃均粘結良好。

3種硅烷改性聚氨酯密封膠的不同厚度試件的進行剪切性能測試，其中薄層粘結的膠層厚度是1 , 2mm，常規粘結的膠層厚度是12mm，測得的剪切強度和最大剪切伸長率的結果如圖11一12所示、通過圖11中的剪切強度數據分析，膠樣A的剪切強度隨著粘結厚度變小呈現上升趨勢，常規粘結厚度12mm的試件剪切強度達到1.33MPa，薄層粘結厚度2mm的試件剪切強度達到1.50MPa，薄層粘結厚度lmm的試件剪切強度達到1.55MPa。膠樣B的剪切強度隨著粘結厚度變小呈現上升趨勢，常規粘結厚度12mm的試件剪切強度達到1.48MPa，薄層粘結厚度2mm的試件剪切強度達到1.59MPa，薄層粘結厚度lmm的試件剪切強度達到1.66MPa。膠樣C的剪切強度隨著粘結厚度變小呈現上升趨勢，常規粘結厚度O.Smm的試件剪切強度達到1.32MPa,薄層粘結厚度2mm的試件剪切強度達到1.01 MPa，薄層粘結厚度1 mm的試件剪切強度達到1.18MPa。3種硅烷改性聚氨酯密封膠薄層粘結試件的剪切強度均高于常規粘結試件的剪切強度。隨著粘結厚度變小，3種硅烷改性聚氨酯密封膠試件的剪切強度呈現上升趨勢。證明硅烷改性聚氨酯密封膠在薄層粘結時能夠提供更大的剪切強度。參照幕墻用硅烷改性聚氨酯密封膠在各種荷載作用下受到剪應力允許的強度設計值來看，同種硅烷改性聚氨酯密封膠在薄層粘結厚度的剪切強度高于幕墻常規粘結厚度的剪切強度。相對來看，薄層粘結的硅烷改性聚氨酯密封膠能提供更高的剪切強度。http://www.kzgjfl.cn/

Scan the QR code to read on your phone

上一篇: MS密封膠的養護時間

下一篇: MS密封膠試件的最大剪切強度伸長率呈現上升趨勢

上一篇: MS密封膠的養護時間

下一篇: MS密封膠試件的最大剪切強度伸長率呈現上升趨勢